


Springfield M1903 Rifle
Country of Origin | United States |
Type | Rifle |
Caliber | 7.620 mm |
Capacity | 5 rounds |
Length | 1.140 m |
Barrel Length | 610.000 mm |
Weight | 3.900 kg |
Rate of Fire | 20 rounds/min |
Muzzle Velocity | 853 m/s |
Contributor: C. Peter Chen
ww2dbaseThe Springfield M1903 magazine-fed bolt-action rifles became the standard rifles of the United States Army in 1903. The design contained features from Mauser rifles ranging from Model 1893 (captured during the Spanish-American War and reverse-engineered) to Gewehr 98, as well as US Army's own Springfield Model 1892-99 Krag–Jørgensen rifles; in fact, this weapon adopted so many Mauser design elements that the United States government ultimately paid royalties to Mauser Werke. By Jan 1905, over 80,000 Springfield M1903 rifles were produced at the Springfield Armory. In mid-1905, at the insistence of President Theodore Roosevelt, M1905 sub-model of the M1903 began production, which had new mounts for knife-type bayonets as opposed to the original rod-type bayonets; Roosevelt thought that the knife-type bayonets were stronger. The barrels were also made shorter with the M1905 variant design.By the American entry into WW1, 843,239 of these rifles had been produced at Springfield Armory and Rock Island Arsenal. Service experience during WW1 found that some receivers were improperly subjected to excessive temperatures during the forging process, which burned away too much carbon, thus creating brittle receivers. The problem was corrected during the war, and the receivers were further strengthened after the war by adding nickel. Together with the modification with the Pedersen device, the new variant was re-designated as M1903 Mark I.
By the WW2 era, although Springfield M1903 rifles were no longer the standard issue rifles having replaced by the semi-automatic M1 Garand rifles in 1936, they remained in production due to war demands. They were produced by private manufacturers Remington Arms (since Sep 1941) and Smith-Corona Typewriter in Rochester, New York, United States (since early 1942). On the front lines, they were used by Army Rangers, snipers, military police, and Marines through the entire length of the war. Some Springfield M1903 were also used by other Allied forces, such as the Free French forces beginning in Aug 1943 and the Brazilian 1st Infantry Division fighting in Italy. A number of examples were captured by Germans during the war, and were used under the designation Gewehr 249(a).
Springfield M1903 rifles remained in use in subsequent wars. The US Marines, for instance, used Springfield M1903 sniper rifles equipped with the Unertl 7.8x sights in both Korean and Vietnam Wars, though the numbers used during the latter were very small. Today, there are still many examples in use, though mainly used only as non-firing drill rifles.
Source: Wikipedia. ww2dbase
Last Major Revision: Aug 2008
Springfield M1903 Rifle Mapa Interativo
Photographs
![]() | ![]() | ![]() | ![]() |
Você gostou deste artigo ou achou este artigo útil? Se sim, considere nos apoiar no Patreon. Qualquer valor já vai ajudar! Obrigado. Por favor, ajude-nos a divulgar o site: Fique atualizado com WW2DB: |
Visitor Submitted Comments
14 Jan 2014 07:55:04 PM
No but I can tell you that the 1903 served as a sniper rifle from ww2 to early days of Vietnam where it was replaced by the 7.62mm M40
14 Feb 2015 06:21:05 PM
The BEST, most comprehensive write up on the us 1903 rifles is "hatcher's notebook" by maj gen julian hatcher. The section on 03s is absolutely exhaustive, complete with production numbers, photos, failure in service records, experimental data, metallurgical analyses, and pretty much ALL minutiae on the arms family. I heartily recommend the general's lifework to all with an interest in american military small arms. General hatcher was commanding officer of the first US army machine gun school. His expertise, engineering knowledge, and scientific approach make this at the very least a "must read"
17 Jul 2025 06:55:23 AM
The Author's assertion that the M1903 was based on the M1893 Mauser is absolutely incorrect. It was based on the M1898 Mauser and the royalties were paid to Mauser based on that. The M1898 used a "cock on opening" bolt and that is the primary think the M1903 copied. The M1893 was a "cock on closing" action witch is the opposite of the M1903 and M1898.
All visitor submitted comments are opinions of those making the submissions and do not reflect views of WW2DB.

- » Wreck of Teruzuki Found (27 jul 2025)
- » USS Orlean's Bow Found (22 jul 2025)
- » The Emperor of Japan Planned to Honor WW2-era Japanese POWs in Mongolia (4 jul 2025)
- » US State Lawmaker John Winter Caught Using Racial Slur "Jap" and Apologized (11 jun 2025)
- » US Government Plans to Purge WW2 Information (17 mar 2025)
- » Ver todas as notícias
- » 1,181 biografias
- » 337 eventos
- » 45,111 entradas na linha do tempo
- » 1,247 navios
- » 350 modelos de aeronaves
- » 207 modelos de veículos
- » 376 modelos de armas
- » 123 documentos históricos
- » 261 instalações
- » 470 eventos
- » 28,476 fotos
- » 365 mapas
Joachim von Ribbentrop, German Foreign Minister, Aug 1939

Por favor, considere nos apoiar no Patreon. Mesmo R$1 por mês já faz uma grande diferença. Obrigado!

Ou, por favor, nos apoie adquirindo alguns produtos do WW2DB na TeeSpring. Obrigado!
2 Mar 2010 10:03:17 AM
I am doing a report on the m1903. Does anyone have any good written sources???????????????????????????????